Dension DAB+P Anleitung zur Fehlerbehebung PDF herunterladen (Seite 19)

iGateway

J. Volume is distorted or low compared to other sources

The iGateway has no USB port, so an iPod has to be used to change the output volume. Visit our

homepage, go to Knowledgebase and look for the volume configuration files in the Download section.

Volume setting procedure:

- connect the iPod to the Gateway, make sure you are in ‘iPod GW’ (gateway) mode so that all

controls are available via the Head Unit

- disconnect your iPod and select the volume configuration file (0.5, 1, 2 or 4 – first two are

recommended upon distortion) and press play

- connect your iPod to the Gateway (you have 1 minute to start the procedure)

- the volume configuration procedure takes about 2 seconds, when finished, the next song will

be played

- turn the Audio System OFF, remove the ignition key and wait for 30 seconds, turn the Audio

System back ON

- Test your Audio System. If the volume output is still distorted, please repeat steps 2-5 with the

0.5 volume configuration file

Please note:

- the volume changing method above does not work with iPod touch or iPhone (!)

- if the problem persists, make sure that the ‘iPod GW’ mode was active upon setting, if yes:

please use a different iPod and repeat the above steps

- these volume configuration files work on iGateway only

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 50 51

Keine Kommentare

Dension DAB+P Anleitung zur Fehlerbehebung Seite 19